Makita 9227 Circular Polisher

Here's the polisher the pros use!

    This is a serious, high-speed, rotary polisher for the skilled enthusiast or professional detailer.

    We have resisted offering high speed polishers in the past because they can remove paint and create swirls if used improperly. In the hands of a skilled operator however, high speed polishers can completely remove surface swirls, paint defects and minor scratches. They can create a surface that reflects light like a mirror.

    Dual action polishers (like the Porter Cable 7424) visually reduce swirls by rounding over top edge of the swirl robbing sunlight of a sharp edge to cause a reflection. Fillers in the polish then fill in the swirl making it less noticeable. While the vehicle looks swirl-free, the swirls are still there and re-appear  over time. A high speed polisher actually removes the swirl by removing the layer of paint down to the lowest point of the swirl. With a little patience, practice and common sense, anyone can master the skill needed to create a swirl-free, mirror bright finish.

    In selecting which high speed polisher to carry, we surveyed our detailer and bodyshop customers. One polisher was mentioned time and time again as being the first choice for durability and ease-of-use. This was the Makita 9227 Rotary Polisher.

    The Makita 9227 offers an electronic speed control (0-3000 rpm) that maintains a constant speed under varying load conditions. This means you can add a little pressure while working out a paint blemish without having the polisher stall or slow down. The large 10 amp. motor works effortlessly for high speed polishing and slow speed wax/protectant application yet the entire unit weighs only 6.6 lbs. A large wrap around handle provides excellent two-hand control for working over edges or into tight corners. A spindle lock built into the polisher makes changing pads safe and easy.

Hook and Loop Backing Plate included:

    The Makita 9227 comes from the factory with a 6-1/2 inch Hook and Loop Backing Plate. This is an odd size but will accommodate any of our 8-1/2 inch Gel Coat Compounding Pads and Finishing Pads. The supplied backing plate will not fit our 6-1/2 or 7-1/2 inch pads. If you prefer working with a smaller pad, you will need the optional VBP-6C 6 inch Backing Plate listed below.

Plus - a FREE Bag!     For a limited time, Classic Motoring Accessories is including a FREE Nylon, Makita Carry Bag. This bag allows you to easily carry your polisher and an assortment of your favorite pads.

Features & Specifications Variable speed (0-3000RPM) Pre-set Speed Setting dial (from 600 -3000 RPM) Electronic speed control maintains constant speed under load. Easily converts to a sander. 3-prong plug to prevent shock. Lock-on button for continuous use at one speed. 6-1/2 inch Hook-and-Loop Backing Plate included. Spindle thread 5/8 x 11 10.0 amp heavy duty motor. Overall length 18-1/2 inches. Overall weight 6.6 lbs.

Customer comments: Regarding your recommendation of the Makita 9227 Polisher, I whole heartedly endorse it. I've been a diehard Makita fan for years and purchased this polisher in the blind. I was not disappointed. I bought the kit with the bag and some additional pads. What a fabulous piece of equipment. The variable speed is fantastic and allows the user to slow it to 600 rpm which makes applying a polish easy with much less throw of material. I've been working on my camper which is fiberglass and used the 8 inch pads which work just fine with the Makita backing plate. Oh, did I mention it's quiet and has that solid feel of quality? The only criticism would be I wish it slowed down even more, say to 300 rpm, for applying some products. Scott P., Vancouver, WA.

MAK-9227Price: $249.99Special: $219.99