The SYSTEM 2000 is a five gallon bucket
with a cover that closes around the polisher. All you do is hold the
polisher. System 2000 does all the work.
Directions:
- Fill the bucket with 4 to 4-1/2 gallons of fresh water.
- Pour in a packet of Snappy Clean Pad Cleaning (Supplied with SYSYEM 2000)
Powder.
- Place machine with dirty pad attached in the bucket
resting on the scrubbing wheels.
- Close the lid covers and turn machine on. Set
machine speed to 1500 rpm. Scrub pad for 15 seconds.
- Lift pad off the scrubbing wheels and allow the pad
to spin dry for another 15 seconds. Turn machine off, open lid and remove
machine.
Pads will slightly damp when
removed. Allow to dry in the sun for a few minutes to fully dry before
storage or reuse.
The SYSTEM 2000 is a professional
pad cleaning system that has been used by body shops, detailing
professionals and on assembly lines around the world. If you detail for a
living or just want the maximum performance from your pads, the SYSYEM 2000
will pay for itself in extended pad life and scratch-free performance.
Note: The SYSYEM
2000 only works with circular machine polishers. It will not work
with dual-action machines like the Porter Cable 7424. The System 2000 comes
with one packet of Snappy Clean Pad Cleaner. Additional Snappy Clean is
available below. The System
2000 is a patented product of Lake Country MFG. Patent number 4,786,333. Coming soon. |